Requirements:

• Your MODEM must be installed in your computer and the modem drivers must be installed into Windows
  
• Microsoft “Dialup Up Networking” must be installed with Windows
• The TCP/IP Protocol must be installed as a network protocol If any of the above items are not installed or are not working please contact the company you purchased your computer from for assistance. St. Louis Internet is not responsible for the proper installation of Windows on your system.

St. Louis Internet offers dialup access throughout all major cities in the United States. This allows you to use your dialup account with us as a local phone call in most cities.

Please CLICK HERE to locate your State and City and obtain a local dialup number. Local numbers for the St. Louis metro area are:

St. Louis: 314-213-7700, 314-244-0005, 314-802-0623

St. Charles: 636-940-6910

O'Fallon: 636-980-2410

STEP 1.
Double-Click on “My Computer”

STEP 2.
Double-Click on “Dial-Up Networking"

STEP 3.
Double-Click on “Make New Connection”

NOTE: If there are other Connections list in this box you may remove them if they are no longer needed. To remove an existing (old) connection, right-click on the connection and choose “DELETE”. Make sure that the connection you are deleting is no longer needed.

STEP 4.
Enter a Name for your connection - such as “St. Louis Internet”. For this example we will use the supplied name: “My Connection”. Using your mouse, click “NEXT” when you have set the connection name and modem to use.

Your Modem should be listed in the lower box. If it is not listed, use the drop-down list to select your modem. If no modem appears then contact the person who installed your computer system because your modem was not setup properly in Windows. If no modem is shown you cannot continue the Internet setup until this has been resolved.

STEP 5.
Click “FINISH” to complete this phase of the installation.

STEP 6.
Right-click on “My Connection” (or the name you called it previously). Click on “Properties”

STEP 7.
Enter the dialup phone number: 801-0016 - Click the “Server Types” tab at the top. ISDN user should use the phone number 613-0523.

STEP 8.
Make sure the following options are set correctly using this example Note that under “Allowed Network Protocols” your list may or may not match the example below. Regardless of what your list shows, make sure only “TCP/IP” is selected. When you have set the options correctly, click on the “TCP/IP Settings” Tab.

NOTE: If “TCP/IP” does not appear in the protocols area, contact the company you purchased your computer from who installed Windows. You cannot continue the setup if “TCP/IP” is not installed on your computer.

STEP 9.
Following the example below, make selections and entries so your screen matches the example. When you have set the options correctly, click on the “OK” Tab to continue.

STEP 10.
Double-Click on the connection you made, or in our example “My Connection” - When the “Connect To” Box appears, enter your login name, password and click the “save password” option box. - Double-Click the “Connect” Button at the bottom of the screen to connect to the Internet !

IMPORTANT
Your EMAIL program and possibly your Web Browser may need to be re-configured to use your new dialup connection. Please consult the documentation for these programs on how to select the correct dialup connection to use. Due to the variety of EMAIL and Web Browser configurations we cannot provide you with a “standard” setup. Please consult your manual or your computer dealer for assistance. The information we have provided you regarding your EMAIL account settings contains all information necessary for proper configuration.